HP-Concentra-Wrapper-Portlet
Actions${title}Loading...
Learn how to open and navigate common BIOS menus and settings. Certain menus and features vary by computer model.
The BIOS (Basic Input Output System) controls communication between system devices such as the drive, display, and keyboard. It also stores configuration information for peripheral types, boot sequence, system and expansion memory amounts, and more. Each BIOS version is customized based on the hardware configuration of the computer model line and includes a built-in setup utility to access and change specific computer settings.
Note:
If you need to update the BIOS to fix a specific issue, improve performance, or support a new hardware component or Windows upgrade, go toHP Consumer Desktop PCs - Aktualisieren des BIOS (Basic Input Output System) (Windows). You can update the BIOS whether Windows starts or not.
Open the BIOS setup utility
Access the BIOS setup utility through a series of key presses during the boot process.
-
Turn off the computer and wait five seconds.
-
Turn on the computer, and then immediately press theEscKey repeatedly until the start menu opens.
-
Pressf10to open the BIOS Setup Utility.
BIOS setup utility menus and settings
Use the top menu bar to access computer information, security settings, and system configuration options. The available settings vary depending on the computer model.
-
file: Check system information, set date and time, and save or discard changes.
(Video) Understanding the BIOS Setup Utility and Menu Options | HP Support -
storage: Get information about storage devices, configure and test storage devices, and select boot options.
-
Security: Set passwords and security settings for system devices, and view the system IDs for the computer.
-
Performance: Configure power management features.
-
Progressive: Select power-up, bus and device options such asNum Lockkey behavior.
CAUTION:
The information saved by the BIOS setup utility is essential. Be careful when making changes in the BIOS. An error can cause the computer not to work as expected.
BIOS setup utility file menu
Check system information, a system log, and options for saving changes to the BIOS settings.
-
System Information: Lists BIOS-related system information, computer model and serial numbers, and processor type.
-
One: Read information about the BIOS Setup Utility.
-
Systemprotokoll: Check a log of BIOS updates.
-
Set time and date: Set the computer time and date.
-
Default setting: Save changes to BIOS settings as new defaults or reset settings to factory defaults.
-
Apply defaults and exit: Reset the computer to default settings and exit setup.
-
Ignore changes and exit: Ignore all setting changes and exit setup.
-
Save changes and exit: Save all new settings and exit setup.
BIOS setup utility memory menu
Review computer memory specifications and options, and make changes to configuration settings.
-
device configuration: Use the arrow keys to select a storage device, then pressinputto review the model number, firmware version, and serial number information.
-
storage options: Change from SATA emulation to AHCI.
-
starting order: Change the order in which the computer uses the boot devices. Use the arrow keys to navigate to the item you want to change, then pressinputto drag the device to a new location.
BIOS setup utility security menu
Manage system-related security settings and passwords.
-
Set up password: Create a password to access the BIOS setup utility.
-
Turn on password: Create a password to turn on the computer.
-
device security: Choose whether specific devices such as system audio, network controllers, and SATA are hidden or available.
Note:
If the computer uses onboard audio on the motherboard, System Audio is not displayed. System Audio is only displayed if a separate sound card is installed.
-
USB security: Enable or disable the computer's USB ports.
-
slot security: Enable or disable the computer's PCI Express slots.
-
network start: Enable or disable the network boot function.
-
System-IDs: View the computer's system IDs, including the universally unique identifier (UUID), SKU number, feature byte, and the build ID of the hardware and software configuration.
-
system security: Change system security settings such as virtualization technology, Software Guard extensions, and Data Execution Prevention. Includes an option to reset security settings to factory defaults.
-
Secure launch configuration: Enable or disable Secure Boot or Legacy Boot and select the Secure Boot key type.
BIOS setup utility power menu
Manage hardware and operating system related power settings and view CPU fan speed.
-
Operating System Power Management: Enable or disable runtime power management and change idle power saving settings.
-
Hardware Power Management: Enable or disable power management settings for devices including SATA, S4, and S5.
-
Thermal: Displays the CPU fan speed.
BIOS setup utility advanced menu
Manage advanced power, bus, and device options, including boot number lock status.
-
power-up options: Change what happens after the computer loses power and the Power On Self-Test (POST) behavior.
-
BIOS power on: Select days and time to turn on the computer automatically.
-
The bus option: Activate or deactivate advanced bus options.
-
device options: Change device options like Num Lock behavior.
Navigating the BIOS Setup Utility menus
Identify the keyboard key used to navigate and select menus and settings in the Setup Utility.
| Keyboard keys | functional description |
|---|---|
| Left or right arrow key | Selects another menu screen (moves the cursor left or right). |
| Arrow key up or down | Selects an item (moves the cursor up or down). |
| input | Runs a command or selects a submenu. |
| f10 | Saves the current values ​​and returns to the previous menu. |
| Esc | Exits the menu or BIOS Setup Utility without saving changes. |
Determine the current BIOS version
Open the BIOS Setup Utility System Information to determine the installed BIOS version.
-
Turn off the computer and wait five seconds.
-
Turn on the computer, and then immediately press theEscKey repeatedly until the start menu opens.
(Video) HP Pro 3500 BIOS Setup Bangla | BIOS Setup Bangla | Computer BIOS Setup Bangla | Ahsan Tech Tips -
Pressf10to open the BIOS Setup Utility.
-
ChoosefileUse the down arrow key to selectSystem Information, and then pressinputto find the BIOS revision (version) and date.
Restore BIOS Setup Utility default settings
Use the BIOS setup utility to restore the factory installed BIOS settings.
-
In the BIOS setup utility, select thefileTab.
-
ChooseApply defaults and exit.
The BIOS Setup Utility closes and the computer boots into Windows.
How to update the BIOS
You can update the BIOS when Windows starts or does not start.
If you need to update the BIOS to fix a specific issue, improve performance, or support a new hardware component or Windows upgrade, go toHP Consumer Desktop PCs - Aktualisieren des BIOS (Basic Input Output System) (Windows).
Fix problems during a BIOS update
If you encounter a problem updating the BIOS, e.g. For example, if a system crash or an error message is displayed, an automatic BIOS recovery is attempted.
The system will not be damaged if it can boot into Windows. In this case, download and install the latest BIOS update fromHP software and driver downloads.
During a BIOS update reboot, a black screen appears and automatic recovery fails
If you get a black screen during a BIOS update reboot and auto recovery fails, there are two methods to manually recover the BIOS.
-
Use the backup file stored on the hard drive: Turn on the computer, then immediately press and holdWindowsTaste
and theBbutton simultaneously until you hear 8 beeps. The BIOS update utility will open to perform a BIOS recovery. -
Download the same or a newer BIOS file: Go toHP Desktop-PCs - Wiederherstellen des BIOS (Basic Input Output System), and then follow the steps to create a USB flash drive for BIOS recovery on another computer. Insert the USB key into the computer with the BIOS problem to start recovery. If nothing happens after inserting the key, restart the computer, then immediately press and holdWindowsTaste
and theBbutton simultaneously to start recovery.(Video) How to - access the BIOS and UEFI settings on Windows 10 HP Laptop ( select Boot Device Priority )
and the");$('#embeddedIframe32255').css({'width' : '800px', 'height' : 'auto'});});$(window).on("load", function(){ $(".table-responsive").addClass("enableScrollOnOverflow");$("img.docImage").addClass("img-responsive");$("img.docImage").css("max-width ","100%");// $(".section.expandable").prev(":not(.section.expandable)+.section.expandable").find(.expandableHeading").css(" border-top", "1px solid #ccc");$(".callout").closest("ol").addClass("calloutList");$('#embeddedIframe32255').css({'width' : '800px', 'height' : 'auto'});//ALM 3290 - ändert startvar checkLC = getCCLC();if(checkLC === 'zh'){varankerList = document.querySelectorAll('.content-link a'); //Wähle alle Anker-Tags mit spezifischem Klassennamenvar modifyAnchorList = Array.prototype.slice.call(anchorList); //Konvertiere Knotenliste in arraymodifyAnchorList.forEach(function(element) {if (element.href.indexOf("zh -hans") > -1 || element.href.indexOf("zh-hant") > -1) { element.href = element.href.replace(/zh-hans/g, "zh").replace( /zh-hant/g, "zh" ); //Ersetzen von zh-hans und zh-hant durch zh}});}//ALM 3290 - Änderungen am Ende});
FAQs
How do I get out of HP BIOS setup utility? ›
In the BIOS Setup Utility, select the File tab. Select Apply Defaults and Exit.
How do I fix a corrupted BIOS on a HP desktop? ›- Turn off the computer.
- Press and hold the Windows + V keys, and then simultaneously press and hold the power button. ...
- When the CMOS Reset screen displays or you hear beeping sounds, release the Windows + V keys. ...
- Press enter to restart the computer.
In order to access BIOS on a Windows PC, you must press your BIOS key set by your manufacturer which could be F10, F2, F12, F1, or DEL.
What is the BIOS key for HP desktop? ›To open the BIOS Setup utility, turn on the computer and immediately press the F10 key repeatedly, about once every second, until the BIOS setup utility screen opens.
How do I restore my computer from BIOS setup utility? ›- Power on or restart the workstation.
- Enter the BIOS by tapping either the right or left bottom of the screen.
- Tap Advanced, and then tap Special Configuration.
- Tap Factory Recovery.
- Select Enabled from drop-down menu.
- Tap Home.
- Tap Save and Exit.
- Navigate to the Settings tab under your Start menu by clicking the gear icon.
- Click the Update & Security option and select Recovery from the left sidebar.
- You should see a Restart now option below the Advanced Setup heading, click this whenever you're ready.
- The laptop stopped working after the BIOS was updated.
- The laptop just died. ...
- Laptop turns on and then off.
- Computer thinks its temperature is too high.
- Laptop turns on but the screen remains black.
A corrupted motherboard BIOS can occur for various reasons. The most common reason why it happens is due to a failed flash if a BIOS update was interrupted. If the BIOS is corrupted, the motherboard will no longer be able to POST but that does not mean all hope is lost.
Can a corrupted BIOS be fixed? ›If your motherboard has a backup BIOS, you can boot into the backup BIOS and reflash the corrupted BIOS. If your motherboard does not have backup BIOS, you may be able to replace the BIOS chip. However, in some cases, the only option may be to replace the motherboard entirely.
How do I get into HP Advanced BIOS? ›- Restart your Computer. Stop whatever you are doing.
- Enter BIOS Settings. Press the Esc key repeatedly until the Startup menu opens.
- Power Off/ Restart your Computer. Power off or restart your computer again, and this time press F9.
- Press F10 and Get the Advanced Tab.
What is HP BIOS administrator password? ›
The default administrator or root password for all HP-provided Build Plans is: ChangeMe123! CAUTION: HP strongly recommends changing this password before deploying to any servers.
What is BIOS Setup Utility? ›The BIOS Setup utility reports system information and can be used to configure the server BIOS settings. BIOS has a Setup utility stored in the BIOS flash memory. The configured data is provided with context-sensitive Help and is stored in the system's battery-backed CMOS RAM.
What is my BIOS key? ›Most modern motherboards use the DEL key, but ultrabooks, gaming laptops and gaming PCs are less consistent. For example, hitting F2 might work on an Asus, but you'll need F10 on an Acer computer.
How do I reset a corrupted BIOS? ›Method 1: Key sequence
Release the CTRL + ESC key on the keyboard. On the BIOS Recovery screen, select Reset NVRAM (if available) and press the Enter key. Select Disabled and press the Enter key to save the current BIOS settings. Select Recover BIOS and press the Enter key to start the recovery process.
- Shutdown your computer.
- Remove the power cord to make sure that your computer receives no power.
- Make sure you're grounded. ...
- Find the battery on your motherboard.
- Remove it. ...
- Wait 5 to 10 minutes.
- Put the battery back in.
- Power on your computer.
After the BIOS page opens, use the arrow key to switch to the Exit section and select "Load Setup Defaults". The option may differ depending on your motherboard; you may see an option like "Reset to Default", "Load Optimal Defaults", or "Restore Settings".
How do I do a hard reset on my HP desktop? ›Restart your computer, and then immediately press the F11 key repeatedly. Click Start . Press and hold the Shift key, click Power, and then select Restart while holding the Shift key. Continue holding the Shift key while the computer restarts.
Why is my computer stuck on HP BIOS update? ›This sounds like BIOS file is corrupted, In order to fix this issue, you need to download a BIOS software driver using another computer and then flash the system.
What happens when you reset BIOS? ›Sometimes it's necessary to reset a computer, for example, after purchasing a used PC or when you've made changes to an existing system. In these cases, you should consider resetting the system settings. A so-called BIOS reset ensures that a computer runs on its factory settings.
What can damage BIOS? ›The BIOS can be corrupted during normal operation, through environmental conditions (such as a power surge or outage), from a failed BIOS upgrade, or damage from a virus. If the BIOS is corrupted, the system automatically attempts to restore the BIOS from a hidden partition when the computer is restarted.
Is my BIOS infected? ›
The only way to detect a BIOS virus is by trial and error and deduction. If your computer is acting like a virus is present, but you're not able to detect one on the disk with up-to-date anti-virus software, you may have one.
Can BIOS be affected by virus? ›Most security pros don't give the system BIOS a second thought, or even a first one, but today's BIOS types are highly susceptible to malicious hackers. Information security threats expert Sherri Davidoff explains how attackers can plant BIOS malware and how security pros can thwart such attacks.
How do I turn off HP system utility? ›- Press "Win-R," type "msconfig" in the Run window and press "Enter."
- Click the "Startup" tab.
- Uncheck the HP utilities you do not want to run at startup. ...
- Click "Apply" and then "Restart."
When the Startup Menu is displayed, press f10. 2. Use the arrow keys to select Exit > Load Setup Defaults, and then press enter.
How do I exit BIOS utility advanced mode? ›After entering the BIOS utility, press Hotkey[F7], or use the cursor to click [Advanced Mode]①that the screen displayed. Load BIOS optimized defaults. Go to [Save & Exit] screen②, then select [Restore Defaults] item③.
How do I disable BIOS setup? ›- Boot and press [F2] to enter BIOS.
- Go to [Security] tab > [Default Secure boot on] and set as [Disabled].
- Go to [Save & Exit] tab > [Save Changes] and select [Yes].
- Go to [Security] tab and enter [Delete All Secure Boot Variables] and select [Yes] to proceed.
- Turn off the computer and wait five seconds.
- Turn on the computer, and then immediately press the esc key repeatedly until the Startup Menu opens.
- Press f10 to open the BIOS Setup Utility.
icon on your taskbar or from the Start menu > HP > HP DesignJet Utility. This launches the HP DesignJet Utility, showing the printers installed on your computer.
How do I turn off HP System Information popup? ›...
This will increase usable memory and processor time.
- Click the General tab.
- Select Selective Startup, and deselect Load startup items. ...
- Click the Services tab. ...
- Restart the computer for the changes to take effect.