Andis 74100 GTX EXO 2022 Review - Best-Trimer (2023)

FAQs

What is difference between T outliner and GTX? ›

The standard T Outliner has your usual 2-pronged cord of medium thickness. The GTX trimmer comes equipped with a 3-pronged, extra thick cord. It feels more solid, regulates the tool's movement better and, you know, just feels manly. It's also safer due to the grounding element.

A clipper is intended for bulk hair cutting on larger areas, but does not cut extremely close to the skin. On the other hand, a trimmer is designed for edging, outlining, dry shaving and light shaping on smaller areas such as the back of the neck, around the ears, around sideburns etc.

Magnify your finest work with the T-Outliner® Trimmer. Ideal for precise outlining, dry shaving, and fading, these ultra-sharp, carbon-steel T-blades cut close and exact. Inside, the magnetic motor churns an impressive 7200 SPM that makes finishing work quick and smooth.

Features. FITS YOUR FAVORITES: T-outliner blades are compatible with Andis T-outliner 04850 04575 04555 04945, Andis T Outliner Cordless, Andis Blackouts, Andis GTX, GTO, and GO. DEEP TOOTH: T-Outliner deep tooth blade feeds more hair and may also be used for detailing hair, beards, and mustaches.

The difference between these two blades is that a T-blade's curved edges enable easy handling and better access for trimming around the ears, back of neck, beards and moustaches and cutting designs into the hair. For everything else and general shaving, a square blade is the perfect tool.

A5 clippers — “A5 clippers refer to the type most professional groomers use,” Schaefer told The Dodo. “These clippers are more heavy duty and utilize various interchangeable steel blades.”

Thus, when you are requesting the number 1 haircut, it means that the barber will trim your hair to 1/8 of an inch length. For your convenience, we have prepared the clipper sizes converted into hair length chart men can refer to whenever they are choosing their haircut. #1 Clipper Length – 1/8 in.

Which Clipper Brand Is Best? Professional clipper brands all have their specialties and a fair share of pros and cons. While it comes down to preference, your budget and hair type, clippers from Andis, Babyliss Pro and Wahl all come recommended by barbers.

A beard trimmer is the best replacement for your razor. It gives you a clean-shaven look without any nicks and cuts. An electric shaver is easier and safer to use than a razor. It is also less time-consuming and doesn't come with the hassle of changing your razor blade frequently.

Both clippers and trimmers have their necessary function for a professional barber. The same would be true of anyone who is cutting hair and wants it to look crisp and clean.

Why do barbers use different clippers and trimmers? ›

Trimmers are perfect for creating definition on shorter hair looks and are the go-to tool of choice for more technical work. Hair clippers, on the other hand, are more versatile in what they can be used for. Typically, clippers will come with a number of interchangeable blades for cutting hair into different styles.

Black Ice Spray Barber Pencil is perfect for drawing a natural hairline. once the line is drawn, simply trace out with a clipper. To finish, razor the area to give you a clean and tight look.

T-blade trimmers or cutters have a blade shaped like a T. This allows you to cut around the ears, beard and neck in a nice way. A T-blade cutter is used to create contours and lines around hair and beard. An advantage is if the machine is small and pretty.

For a professional groomer grooming between 6-8 dogs a day, It is recommended to replace your blade drive every 6-8 weeks, or more frequently if you notice signs of wear.

Built to stay true over the long haul, the GTX Deep-Tooth Blade offers compatibility with Andis GTO and GO trimmers.

Blocking blade is ideal for full clipdowns on matted dogs, free-hand shortening of coats before scissoring, blocking or skimming. Used for removing the bulk of hair and clipping pattern lines on large breeds with heavy coats.

A square trimmer line can trim longer grass and also cleanly cut larger weed plants without putting in an excessive effort. However, this type is not as durable as the round strings. There have been multiple instances of the string trimmer line wearing out quickly when used on harder surfaces.

Stays sharper, longer - One of the biggest benefits of owning a ceramic blade is its tendency to stay sharper for extended periods compared to its steel counterparts. Also, ceramic blades tend to have sharper blades than stainless steel due to their hardness.

F or FC stand for the same thing: fine cut or finish cut. One brand might call their blade an F and another might say FC but they are referring to the same thing. The teeth on an FC blade are all the same length, so result in a smoother finish than the same blade in skip tooth (ST).

Curved Scissors:

As almost no part of a dogs body is perfectly straight, many groomers find using curved scissors easier to use when styling and shaping towards the end of the groom.

Which is better trimmer or groomer? ›

The beard trimmer is specialized in trimming the beard hairs. The body groomer adds a shaving function to this, so you can also go for a smooth shave. For both your beard and body hair. Also suitable for shaving and detailing, depending on attachment.

Stainless steel clipper blades are generally the industry norm. While they tend to stay cooler for longer, ceramic blades are much easier to break. Clipping blades are also available in different coatings meant to enhance their function. Silver is antimicrobial.

For light work, such as trimming grass, 0.065″-0.085″ should be sufficient. For thicker grass and weeds, a line in the 0.085″-0.110″ range will get the job done, and for thicker underbrush, anything thicker than 0.110″ will work.

Number 1: One-eighth of an inch. Number 2: One-quarter of an inch. Number 3: Three-eighths of an inch. Number 4: Half an inch.

Look for trimmers with adjustable-length shafts or handles so you can customize the size to your height. Noise output: Gas-powered trimmers are always the loudest; corded electric and battery-powered trimmers are quieter. Even so, it's best to use ear protection when running string trimmers.

Oster clippers which use Blades are often used in military barber shops (they are powered by a motor instead of an electric vibrating device and tend to stay cooler during heavy use). Blades used on Oster clippers include: 00000 - 1/125 inch. 0000 - 1/100 inch.

Some of the busier barbers also have two of each clipper on their station so that one can be recharging while they are using the other one. This also keeps the clippers in good condition longer, cutting the wear and tear on each clipper in half.

In the horse industry, says Fred Koeller, vice president of marketing for Andis, the number 10 blade, which leaves hair 1/16 of an inch long, has become the most popular medium blade, and many general-use clippers come with a number 10 blade attached.

In a few words, choose the Foil shaver if you have sensitive skin, fine hair, and you prefer a smooth and clean shave. If you want to shave your face, go for foil. Pick the Rotary shaver if you want to shave your head. Also, it is the best choice for those with strong facial features and dense or coarse hair.

Hold the shaver at a right angle (90°) to your skin and shave against the direction of beard growth. Also keep in mind that avoiding going over the same areas over and over again helps in preventing a shaving rash. Keep the pressure even to achieve the best possible clean shave.

Is trimmer or scissor better for haircut? ›

Since scissor cuts are loose, they contours better to the head. As a result, scissor cuts are more natural and are easier to blend. Furthermore, these cuts grow back naturally and are better than clippers. Finally, scissor cuts tend to last longer and there is more control over the cuts.

As a barber, you have more control with a scissors cut than with clippers. Because of the way it grows out, a scissors cut tends to last longer. And overall…a scissors cut just grows out better. If you want a very close cut — like a military cut — then a clipper cut is the better choice.

Applying product helps the hair to stay evenly damp throughout the haircut. Maintaining the moisture level in the hair helps to maintain even and consistent distribution of the hair. Even moisture levels also help to maintain equal tension as you cut.

After you tell your barber what general style you want, tell him exactly how much you want taken off. Don't just say, “Give me a trim, Mac” or “Just a little off the top.” One barber's trim is another barber's close shave.

A barber has to sanitize and disinfect his haircut tools every time, in between every customer. You want everything you use on your client to be clean, with no exceptions. It's also the law! The best ways to disinfect barber tools are spraying, dipping, and immersing them for 10 minutes in the disinfectant solution.

Novice or people who are self groomers should start with the manufacturer's settings. If factory settings aren't satisfactory only then should you zero gap your clippers. 0.2 mm is the minimum gap between blade tips I would recommend.

When your blades start to pull the hair the first thing to try is apply two drops of clipper oil to the blades and test cut again. (Oil lubricates the blades and allows them to run at the correct speed and ensure better cutting. It also helps the clipper run cooler.

One last thing we need to mention: Clippers can come in a closed and open position. A closed lever position cuts hair close, while the open position cuts it longer and softer.

With a freshly done, line haircut, you might notice a little white line around the hair and the beard. Don't worry, it'll go away! That's just the remnants of the aloe vera (or whatever spray or cream) your barber used to make it easier to edge the hair.

The Barber Magic Pencil is use to draw onto a person natural hairline. Once the line is drawn then you simple trace cut out with clippers and razor to give your haircut a sharp and clean look.

What is the difference between T outliner and GTX? ›

The standard T Outliner has your usual 2-pronged cord of medium thickness. The GTX trimmer comes equipped with a 3-pronged, extra thick cord. It feels more solid, regulates the tool's movement better and, you know, just feels manly. It's also safer due to the grounding element.

A clipper is intended for bulk hair cutting on larger areas, but does not cut extremely close to the skin. On the other hand, a trimmer is designed for edging, outlining, dry shaving and light shaping on smaller areas such as the back of the neck, around the ears, around sideburns etc.

Rated 5 out of 5 by SmartPaker Tanner from Perfect for body clipping The Andis T-10 UltraEdge Blade is my favorite blade for body clipping my mini. This blade cuts hair slightly shorter than the Andis T-84 UltraEdge Replacement Blade, and therefore, my clip lasts a little bit longer!

A: Yes this will fit. However, this blade will not have a 'T' shape. Use the specific 'T' blade for a sharp dynamic edging liner.

Speaking of accessories, Andis guards are usually sharper and a bit more durable than Wahl clipper guards. If you're cutting kids' hair, you have to be more careful. The Master, however, comes with no guards included. I suggest you grab Andis Nano purple guards from Amazon.com if you go for the Masters.

The Wahl Close Cut Clipper with ultra-close blades will cut your hair as short as 0.4mm, which is 50% closer than standard blades of 0.8mm, giving you the confidence to achieve an ultra-close cut or smooth finish.

Also called whetstones or sharpening stones, these are available at some home improvement and hardware stores. Using a 4000 grit surface, angle the blade at about a 30–45º angle, and move it forward (only) across the stone five to ten times, until it looks shiny and even.

T-blade trimmers or cutters have a blade shaped like a T. This allows you to cut around the ears, beard and neck in a nice way. A T-blade cutter is used to create contours and lines around hair and beard. An advantage is if the machine is small and pretty.

The T-Outliner naturally offers a longer blade that protrudes slightly outward from the base of the trimmer. But the Outliner 2 also has a blade that is dense and offers a controlled cut every time.

The T-Blade creates precise lines for cleaner, closer, and faster cuts. The wider blade gives increased control for fading, outlining, and trimming hard-to-reach areas. Take your Bevel Trimmer to the next level. Packaging may vary. *Compatible with Bevel Trimmer only.